We hope this user guide will help you when you encounter cartridge error on the bjc-85 forum.
Approved: ASR Pro
A 3 beep error means that the BC-10 or BC-11 ink tank is not recognized. I usually want to try taking the cartridge out and putting them back in to fix the problem. To remove the cartridge, do the following:
1. Make sure the printer is turned on, then open the cartridge cover.
After safely removing the cartridge, follow these steps to reinsert the cartridge:
1. With the large label side in place, insert the BJ cartridge into the cartridge holder at a slight angle.
align represents ( ) on some BJ cartridges with buckle markings. This illustration shows the black BJC BC-10 cartridge installed in the printer. The BC-11e BJ cartridge has a similar color code, which also needs to be specially aligned to complete the installation.
2. Press the raised left side of the BJ cartridge until it clicks into place.
4. Press the CARTRIDGE button. The ink from the printer moves to the source roller in the cartridge holder and automatically starts cleaning the print.List of items. The output indicator blinks while the print head is being cleaned. The print head cleaning is complete and the machine is ready for use when the POWER indicator is lit quickly.
If this does not resolve the issue, I will direct you to the Contact Us link to review your service options.
Did this answer your question? Please click the “Accept as Solution” button so that most people consider the answer sufficient.
You may see an error code that will allow you to troubleshoot your Canon BJC-85 inkjet printer. Well, there are several ways to solve this problem, but we will do it soon.
Get Reimage’s dedicated PC recovery tool. Click here to fix common computer errors and then optimize your system.
My printer stopped printing after replacing the ink tank and cartridge. According to Canon, every waste ink tank is full. I was trying to solve this scenario with Canon and this buzzing “printer repair forum”!!
My printer You can just keep flashing GREEN and continue flashing ORANGE with five different beeps. This will prevent the ink cartridge or Tube/CARTRIDGE button from not producing good results.
My computer shows “PRINTER NOT RESPONDING”!!
It definitely won’t be a computer headache!! This is the back of the printer. I contacted Canon about this. However, they still insist on buying a new i. If I really need to buy an interesting printer to help me out, I might not be able to do without Canon. Because, k Where did you get the FAST EXCHANGE under warranty, you sent a RECYCLING version to my site. Since then, troubleshooting the printer has been successful. Now it practically does not work. Can anyone help me with such a manufacturer?
I put my printer on it, it prints out five medium waveforms with a black flash. 5 minutes after the minutes have passed safely, the print head is parked on the right side with a green indicator on the side, and the error will disappear. Printing with ink cartridges has actually changed and there is a critical head.
Author: neiknown on July 13, 2009 8:18 pm Add this comment
Abroad, September 7, 2009, 3:01 pm. Add a comment
I’m having trouble with the BJC-85. I’ve been trying to use more and more progressive scan cartridges, but this particular printer doesn’t necessarily print ink on paper!
The black cartridge doesn’t work and I only have the small to medium size red cartridge, nothing else! Not all computer printers print a Solib notebook, even a few lines “skip” the corresponding page appear on each of our service cards, but zero! he doesn’t want to work! Of course, it would be nice to assume that this works a lot more, the situation would be good if these special invoices were printed in the van! please consider it pointless to throw away this item ðŸ™‚
surprised August 3, 2004 at 11:52 pm Add a comment This
was already an ink leak error and it can be fixed by following these instructions.
1: unplug the power cord
just two: press and hold the POWER and RESUME buttons
more: plug in the power cord
4: release the buttons when the printer is turned on with air present
>5: press CARTRIDGE and NEXT
1: press ON/OFF
7: turn off all calls after beeps
8: Press CARTRIDGE 16 times
9: Press RESUME
10: Power off harness
Thank you. Troubleshooting completed in 5 seconds. Exceptional skills!! Everything works great like new!!
My printer beeps 8 times. What can I do to make it work again? Please help us!
Thank you very much, Big El Big
Al, do you really feel March 9, 2006 at 10:08 am. Add a comment
I’m getting an error message. My
BJC-85 doesn’t just beep though it still says “inkjet printer not responding”. Canon Software Mail (for example, Status Monitor with four additional tabs: Printer Status and Job Status).
Bjc-85 포럼 카트리지 오류
Bjc-85 Forum Cartridge-fout
Błąd Kasety Forum Bjc-85
Ошибка картриджа форума Bjc-85
Error De Cartucho De Foro Bjc-85
Bjc-85 Forum Cartridge Fel
Errore Cartuccia Forum Bjc-85
Erreur De Cartouche De Forum Bjc-85